AstroBin

AstroBin

AstroBin

Flats - Color vs Mono Other · D. Jung · ... · 6 · 304 · 1

mxpwr 7.29
D. Jung
...
· 
·  Share link
Wondering if this is something anyone else has seen. I recently switched from color to mono and noticed that the flats for the same filter and same optics look quite different.

image.png
To the left is the flat for my color camera (533MC) and to the left for my mono (6200MM) cropped to show the same area. Same optics, same filter (Antlia Edge Sii). The mono flat shows the expected vignetting of the Newtonian with some dust specks. But the color flat shows another pattern on top (which also shows up in the lights and usually cancels out just fine).
I always thought the non-uniformities in my flats are coming from differences in the coating of the filter but now it looks more like this might come from non-uniformities in the CFA across the color sensor. Any thoughts?
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
Gondola 8.11
Tony Gondola
...
· 
·  Share link
I really hate flat peeping, it's a personal problem, I know ;)
Honestly though, I never look at them unless I have a problem that's visible in my light frames. How do your calibrated stacks look with the new camera?
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
mxpwr 7.29
D. Jung
Topic starter
...
· 
·  Share link
For both, color and mono the calibrated lights look fine. No issue, this is more of an academic question. Curiosity about where the difference is coming from.
Edited ...
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
andreatax 9.89
andrea tasselli
...
· 
·  1 like
·  Share link
Different sensor, different bandpass thus different responses
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
dkamen 7.44
dkamen
...
· 
·  1 like
·  Share link
D. Jung:
For both, color and mono the calibrated lights look fine. No issue, this is more of an academic question. Curiosity about where the difference is coming from.

Different sensors, different optical trains (osc has an IR cut window, mono does not or has a filter in front), different flats.
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
StewartWilliam 5.21
AstroShed
...
· 
·  Share link
Both those flats shown above, look totally awful TBH, but they should look different as 2 completely different sensors and optical trains, so not sure what you expect really, do they work with your images, if so what’s the issue…? If not then try again
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
coolhandjo 2.39
Coolhandjo
...
· 
·  Share link
I get very strange flats. Regardless if mono or osc. Coatings and shadows can play with the flat but that's the whole purpose. It exposes issues in your optical train not otherwise seen. Will vary from osc to mono because its two different cameras
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
 
Register or login to create to post a reply.
×

Warning!

This operation will reload the current page. If you have any unsaved information in a form, it will be lost.

You can also dismiss this window, and your operation will be applied at the next page navigation.