AstroBin

AstroBin

AstroBin

Bug? User Error? 10Micron GM1000 HPS · Jerry Gerber · ... · 5 · 139 · 0

jsg 9.55
Jerry Gerber
...
· 
·  Share link
Hi all,

My 1000GM mount's virtual handset is showing the correct time/date (DST ON).   The location coordinates are also correct, as is the altitude. 
But UTC time is off by an hour, it's an hour earlier than it should be.  

Any ideas what's going on?

Thanks,
Jerry
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
DarkStar 18.93
Ruediger
...
· 
·  Share link
Hi Jerry,
have you checked daylight saving time settings?

CS
Rüdiger
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
jsg 9.55
Jerry Gerber
Topic starter
...
· 
·  Share link
Yeah, as mentioned in my post.
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
DarkStar 18.93
Ruediger
...
· 
·  Share link
Jerry Gerber:
Yeah, as mentioned in my post.


sorry I missed that. Too fast reading. Time zone also checked? Have you manually set the time, or got it via GPS?
do you sync it via PC? Have you connected to NINA, because it sets time via ASCOM if not disabled.
Edited ...
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
jsg 9.55
Jerry Gerber
Topic starter
...
· 
·  1 like
·  Share link
I resolved it.  I feel a bit stupid because the reason why the mount wasn't slewing to the right location is because it didn't have GPS info available.  And that is because the MGP Box that sends GPS data to the mount needs access to the sky and the roof was closed due to wind.  Duh….  ;>)
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
Overcast_Observatory 19.90
Chris White- Overcast Observatory
...
· 
·  1 like
·  Share link
Jerry Gerber:
I resolved it.  I feel a bit stupid because the reason why the mount wasn't slewing to the right location is because it didn't have GPS info available.  And that is because the MGP Box that sends GPS data to the mount needs access to the sky and the roof was closed due to wind.  Duh....  ;>)



Isn't this hobby fun?  To get all of this stuff to work AT THE SAME TIME is more challenging than sending a human to the moon.
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
×

Share this forum post

Copy the URL below to share a direct link to this post.

Close
×

Post editing not available

This post cannot be edited using the classic forums editor.

To edit this post, please enable the "New forums experience" in your settings.

Go to Settings Close
 
Register or login to create to post a reply.
×

Warning!

This operation will reload the current page. If you have any unsaved information in a form, it will be lost.

You can also dismiss this window, and your operation will be applied at the next page navigation.