Hi there, due to the amazing weather I'd like some decent data to practice my l33t processing skills on ;) but I'm struggling to find any osc stuff.
Even osc + narrowband would do if I can just not use the narrowband data?
Any suggestions or links would be fantastic Ty.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
I have posted these for other members. These are fully calibrated stacks with the 2600MC of various targets. You can see the finished results on my page to get an idea of what is contained within the data as well as integrations times, gain, etc. Hope this is useful. Regards, Itto (Jim) https://www.dropbox.com/scl/fo/pte6okifm925orseoxvrc/h?rlkey=u0t5vppk5vh6n3p18osnu5qx0&st=tsj8idcr&dl=0 |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Itto Ogami:
I have posted these for other members. These are fully calibrated stacks with the 2600MC of various targets. You can see the finished results on my page to get an idea of what is contained within the data as well as integrations times, gain, etc.
Hope this is useful.
Regards,
Itto (Jim)
https://www.dropbox.com/scl/fo/pte6okifm925orseoxvrc/h?rlkey=u0t5vppk5vh6n3p18osnu5qx0&st=tsj8idcr&dl=0 WI'll look at them soon but I'm certain they will be useful Ty so much for doing this downloading them now ty so much will message you if i make something nice  |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/ and Ty too. Will have a look soon, if I create an image I like (bare in mind I'm a noob) I'll message you to show off ;)
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Eric Gagne:
Not perfect but it’s free and some people have done well (better than me) with it.
https://www.astrobin.com/forum/c/astrophotography/deep-sky-processing-techniques/sharing-data-for-knowledge-exchange-and-discussion/ i didn't even find that sub forum ... doesn't bode well for my processing prowess. ty for the link will have a look see |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/ did you publish your results from these sets on astrobin? i had a quick look at your gallery and couldn't see triffied/lagoon nebula which i've had a stab at. im sure i could do better than what i have done already, but wanted to compare/contrast |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
I am pretty sure that almost everything in there is published on here. Some of my recent work that I have posted on here this year has not made it in there yet.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
not many people know about this place: datasets upon datasets, all free: https://discord.com/channels/794642864218439681/1021002743080558642 |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
TiffsAndAstro:
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/
lol i already tried one or two of your extensive archive, had trouble photometric colour calibrating them due to weird meta data, at least on cygnus.zip  Problems like that are probably a result of stacking in APP which strips Ra and Dec data. Some data I may have saved with a valid plate solved solution and some not.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
not many people know about this place:
datasets upon datasets, all free:
https://discord.com/channels/794642864218439681/1021002743080558642 l would never in my life looked in discord for such stuff, ty for this |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Gilmour Dickson:
TiffsAndAstro:
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/
lol i already tried one or two of your extensive archive, had trouble photometric colour calibrating them due to weird meta data, at least on cygnus.zip
Problems like that are probably a result of stacking in APP which strips Ra and Dec data. Some data I may have saved with a valid plate solved solution and some not. i think this is a bit beyond me for now, but i'll have another trawl through your extensive archive. if not right now, im certain this will help me a lot in the future. ty again making this available to others |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Itto Ogami:
I have posted these for other members. These are fully calibrated stacks with the 2600MC of various targets. You can see the finished results on my page to get an idea of what is contained within the data as well as integrations times, gain, etc.
Hope this is useful.
Regards,
Itto (Jim)
https://www.dropbox.com/scl/fo/pte6okifm925orseoxvrc/h?rlkey=u0t5vppk5vh6n3p18osnu5qx0&st=tsj8idcr&dl=0 Tried your M31 data:  (cropped)
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Very nice process Messierman  glad you're having fun with the data. Regards, Itto (Jim)
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Itto Ogami:
I have posted these for other members. These are fully calibrated stacks with the 2600MC of various targets. You can see the finished results on my page to get an idea of what is contained within the data as well as integrations times, gain, etc.
Hope this is useful.
Regards,
Itto (Jim)
https://www.dropbox.com/scl/fo/pte6okifm925orseoxvrc/h?rlkey=u0t5vppk5vh6n3p18osnu5qx0&st=tsj8idcr&dl=0
Tried your M31 data:
(cropped)
i really can't wait for m31 to get higher up so i can fail to get amazing data like this.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/ *** Im gonna try some of your data. What equipments did you use to capture them? ***
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Abdul Thomas Jnr:
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/
*** Im gonna try some of your data. What equipments did you use to capture them? *** looking at your gallery, you don't need any help |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
TiffsAndAstro:
Abdul Thomas Jnr:
Gilmour Dickson:
https://www.cloudynights.com/topic/862495-process-my-data-thread/
*** Im gonna try some of your data and thank you for sharing them. You are one of the lucky ones to live in the darkest of skies 😁***
looking at your gallery, you don't need any help *** Well thank you. Still some free data for me to play with 😂***
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Itto Ogami:
I have posted these for other members. These are fully calibrated stacks with the 2600MC of various targets. You can see the finished results on my page to get an idea of what is contained within the data as well as integrations times, gain, etc.
Hope this is useful.
Regards,
Itto (Jim)
https://www.dropbox.com/scl/fo/pte6okifm925orseoxvrc/h?rlkey=u0t5vppk5vh6n3p18osnu5qx0&st=tsj8idcr&dl=0 Thank you for offering this data - here's my take on the Lagoon and Trifid. I was amazed at the quality of the raw file - it didn't need much processing and looked great right after the first STF stretch. Great job calibrating it! Thanks again. CS, Mark  |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Itto (Jim), Thanks my friend for your generosity in providing this data. I did manual color calibration because I was 2 lazy 2 plate-solve to use SPCC in PI. Other than that standard OSC 2024 Workflow in PI. I also did some aggressive start reduction... Great Data!!!!  CS Tim
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Thank you for offering this data - here's my take on the Lagoon and Trifid. I was amazed at the quality of the raw file - it didn't need much processing and looked great right after the first STF stretch. Great job calibrating it! Thanks again.
CS,
Mark Very nice result Mark Thanks for the feedback on data quality. Glad you're finding it useful! Regards, Itto (Jim)
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
Tim Ray:
Itto (Jim),
Thanks my friend for your generosity in providing this data. I did manual color calibration because I was 2 lazy 2 plate-solve to use SPCC in PI. Other than that standard OSC 2024 Workflow in PI. I also did some aggressive start reduction...
Great Data!!!! Tim, Thanks for the feedback regarding data quality. Always looking for ways to improve or just be satisfied with my current calibration process. VEry nice process my friend. Glad so many are finding these useful to improve their processing. Regards, Itto (Jim)
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
This image Data from Oort Cloud (Dave) from the Cloudy Nights link from this thread. I have never imaged this object so I thought I would give it a go. This is true RGB data with a Ha sub not OSC data with a Ha sub. It falls outside this thread of doing OSC RGB processing, but I thought I would share the result. Nice data. META data was included so a nice Plate-Solve and SPCC was used in the PI workflow.  CS Tim
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Copy the URL below to share a direct link to this post.
This post cannot be edited using the classic forums editor.
To edit this post, please enable the "New forums experience" in your settings.
